|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: 2007 jeep wrangler remote start prep
|
  |
|
| Author |
|
|
yazeljr
Joined: January 26, 2012
Location:
Indiana,
United States
Posts: 7 |
| Posted: February 01, 2012 at 6:25 PM - IP Logged |
|
|
ok, another question. Upon unplugging the 5 pin connector, there are only 4 wires. The MUX wire is nonexistent. I'm stumped...
thanks again. |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
offroadzj
Joined: June 03, 2005
Location:
New York,
United States
Posts: 1,240 |
| Posted: February 01, 2012 at 6:36 PM - IP Logged |
|
|
offroadzj wrote:
| Are you sure its the mux that is missing and not the starter? Some will not have the + starter, and depending on how you are looking at the plug, they could appear to be the same pin... |
|
|
Apparently you double posted, and it happened to go onto the next page... so in case you missed this reply...
___________________________________
Kenny
Former Installation Manager
Circuit City Roadshop
Store #3160
Albany, NY 12205 |
|
| Back to Top |
|
|
|
yazeljr
Joined: January 26, 2012
Location:
Indiana,
United States
Posts: 7 |
| Posted: February 01, 2012 at 6:37 PM - IP Logged |
|
|
 
Pretty sure I'm looking at it correctly. These pics are from my actual vehicle. Am I wrong?
side note: I see you were the Roadshop install manager, I was the OPS manager at Circuit 3729 - fort wayne, IN. Thats kinda cool i thought. |
|
| Back to Top |
|
|
|
offroadzj
Joined: June 03, 2005
Location:
New York,
United States
Posts: 1,240 |
| Posted: February 01, 2012 at 6:46 PM - IP Logged |
|
|
You need to look at the plug from the back of the plug. The violet/brown (can't see the brown, but I can take bets it has a brown tracer) is your mux wire, and the blue/red is your 12v. DO NOT connect the main r/s 12v input to this wire. It is only fused at 10amps. Not sure if you have another option (ie kickpanel, etc) but I always take the 12v directly from the battery with an additional 30amp fuse right at the battery. You do not have the starter wire so you will need to follow wire diagram C or D (depending on if you are going w2w or d2d). It MAY not require the mux relay, but check the diagram before you just go on my word... I don't know that vehicle exactly.
I ended up getting my current job and putting my 2 weeks in to Circuit City about a week before they announced they were closing. Talk about perfect timing. I ended up staying through some of the liquidation to help out where I could.
___________________________________
Kenny
Former Installation Manager
Circuit City Roadshop
Store #3160
Albany, NY 12205 |
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
