|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: 2011 gmc sierra/clifford 590.2 lighting?
|
  |
|
| Author |
|
|
01ws6/tamu
Joined: December 28, 2010
Location:
Texas,
United States
Posts: 15 |
| Posted: January 27, 2012 at 12:15 AM - IP Logged |
|
|
I used a db-all and data to data when installing here is where my aggarvation lies and I'm curious if it's just how it is with a aftermarket alarm in the new trucks.
At night disarm it with stock keyless remote headlamps/parklamps/backup lamps and domelight illuminate.
Disarm with the clifford and I get 2 blinks of the parklights and then darkness. Does the DB all not force the bcm to turn on all exterior lighting.
I know I can wire up external relays to trigger all of these functions but I figured I'd try it first my 06 old body style turned all exterior lighting after disarming the alarm. And my newer smart truck gives me the finger.
For those that have installed using the db all in the new sierras and silverados is this how they work in the newer trucks |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
offroadzj
Joined: June 03, 2005
Location:
New York,
United States
Posts: 1,240 |
| Posted: January 27, 2012 at 8:01 AM - IP Logged |
|
|
According to xpresskit.com the db=all doesn't control the lighting at all. Normally parking lights are connected from the r/s to the vehicle and will only flash the parking lights. There may be some other way to get it to work, but I am not aware of any.
___________________________________
Kenny
Former Installation Manager
Circuit City Roadshop
Store #3160
Albany, NY 12205 |
|
| Back to Top |
|
|
|
tedmond
Joined: January 06, 2007
Location:
Ontario,
Canada
Posts: 3,843 |
| Posted: January 27, 2012 at 9:55 AM - IP Logged |
|
|
using the fortin evo-chr with gm harness, it will control all factory options.
___________________________________
Ted
P2W901SS
Compustar Pro Dealer
"If your girlfriend yells at the top of her lungs, is that SQ or SPL?" |
|
| Back to Top |
|
|
|
sparkie
Joined: November 06, 2003
Location:
Canada
Posts: 1,806 |
| Posted: January 28, 2012 at 3:20 PM - IP Logged |
|
|
The I-data ADSALCA module will also activate the perimeter lighting feature. If you use one, make sure to also use the ADSRNGGM3.
___________________________________
sparky |
|
| Back to Top |
|
|
|
01ws6/tamu
Joined: December 28, 2010
Location:
Texas,
United States
Posts: 15 |
| Posted: February 01, 2012 at 11:13 PM - IP Logged |
|
|
| I had already installed the db-all I'll try it for a while and if it bugs me too much swap out to one of the mentioned modules. I guess for the most part it night when I get in it and already remote started so it's no big deal anyway. I thought there might have been a setting I was missing. Thanks |
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
