|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: receiver and amp have built in crossover
|
  |
|
| Author |
|
|
fronzizzle
Joined: February 21, 2010
Location:
Michigan,
United States
Posts: 29 |
| Posted: January 29, 2012 at 2:21 PM - IP Logged |
|
|
I have a JVC Arsenal KD-AHD79 receiver and a Sony Xplod XM-ZZR3301 amp running my two 12" Sony subs. The radio has the sub preouts, which have a built in crossover as well as a level adjustment. The amp also has a built in adjustable crossover as well as the gain control, I'm trying to figure out what to set each of them at or what the best way to go about tuning my system is.
I think the receiver crossover is 55/85/120 Hz while the amp is adjustable from 50-300. Thanks. |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
DYohn
Joined: April 22, 2003
Location:
Arizona,
United States
Posts: 10,114 |
| Posted: January 29, 2012 at 6:02 PM - IP Logged |
|
|
Use the receiver Xover and set the amp to OFF or turn it all the way towards the highest setting. See the "How to set your gain" thread in the Hot Topics forum for level setting instructions.
___________________________________
Support the12volt.com |
|
| Back to Top |
|
|
|
fronzizzle
Joined: February 21, 2010
Location:
Michigan,
United States
Posts: 29 |
| Posted: January 29, 2012 at 7:20 PM - IP Logged |
|
|
Thanks, just read it.
The amp doesn't have an off, so should I'll set it to 300.
As for the receiver, which Hz setting should I use? 55, 85 or 120?
The receiver also has a sub-level input (from 0 - 8), do I want this at 8?
For the amp, there is also a subsonic filter (6 - 70 Hz) and low boost level control (0 - 10 db). Where should I set these? |
|
| Back to Top |
|
|
|
DYohn
Joined: April 22, 2003
Location:
Arizona,
United States
Posts: 10,114 |
| Posted: January 29, 2012 at 8:10 PM - IP Logged |
|
|
Yes. 300. Try 85. Yes, set to max when you set the amp gain. Is the subwoofer enclosure vented? If so set the subsonic to just below the tuning frequency. If it's sealed, set it to off or its lowest setting. Keep the bass boost off (set to zero.)
___________________________________
Support the12volt.com |
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
