|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: 00 gmc sierra 570t wont stay runninng
|
  |
|
| Author |
|
|
pts760
Joined: December 11, 2009
Location:
Iowa,
United States
Posts: 131 |
| Posted: January 31, 2012 at 3:34 PM - IP Logged |
|
|
Sounds like two issues. One being a tach issue and the other a passlock 2 issue. Try the ECM under the hood for the tach. Its on the driver fender, white plug (it's labeled), white wire. Use a jumper wire before you make anything permanent. I've had tach signals that have programmed before but for some reason the remote start didn't like the signal. For the Passlock 2, from the PLJX, make sure the blue wire is connected to the Yellow passlock wire and the Black wire is connected to the orange/black passlock ground wire in the vehicle (NOT TO THE CHASSIS).
___________________________________
I drink current, eat ohms, and bleed voltage |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
pa_probe
Joined: November 11, 2010
Location:
Pennsylvania,
United States
Posts: 20 |
| Posted: January 31, 2012 at 3:38 PM - IP Logged |
|
|
Starter keeps cranking.
I will check the PLJX wiring as noted.
|
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
