|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: clifford arrow 2 remote programming
|
  |
|
| Author |
|
|
8o8supra
Joined: February 01, 2012
Location:
Hawaii,
United States
Posts: 3 |
| Posted: February 01, 2012 at 3:19 PM - IP Logged |
|
|
| I have a arrow 2 alarm installed in a car i bought used it didnt come with any remotes when i bought it so i got a remote online but it says in order to program the remote i need to copy the trace cuts on the old remote (which i dont have) or find the control unit coding tag. I am wondering if any one cold help me to find how i can get the remote programmed. Thanks |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
pts760
Joined: December 11, 2009
Location:
Iowa,
United States
Posts: 131 |
| Posted: February 01, 2012 at 3:41 PM - IP Logged |
|
|
Try this: Page 10 & 11 of the owners guide
Erase the old codes then program new remotes.
Clifford Arrow 2 remote programming
___________________________________
I drink current, eat ohms, and bleed voltage |
|
| Back to Top |
|
|
|
howie ll
Joined: January 09, 2007
Location:
United Kingdom
Posts: 9,717 |
| Posted: February 01, 2012 at 4:24 PM - IP Logged |
|
|
Turn on ignition, flick the valet switch 13* times then press button 1. You should hear 2 confirming chirps.
Turn off ign. then on again, flick 14* times then press button 2, etc. etc.
*You should hear chirps after 3 or 4 flicks of that switch.
The other info is completely wrong, it applied to their previous entry model, the Novell.
___________________________________
Amateurs assume, don't test and have problems; pros test first.
Read the installation manual, do a search here for your vehicle wiring. |
|
| Back to Top |
|
|
|
8o8supra
Joined: February 01, 2012
Location:
Hawaii,
United States
Posts: 3 |
| Posted: February 02, 2012 at 12:31 AM - IP Logged |
|
|
| Okay I tried doing that with out cutting traces and it still does not want to work i get the conformation chirp after the first button but it doesn't work. Anything else I can try??? Thanks for the help |
|
| Back to Top |
|
|
|
howie ll
Joined: January 09, 2007
Location:
United Kingdom
Posts: 9,717 |
| Posted: February 02, 2012 at 1:02 AM - IP Logged |
|
|
DEI GENUINE replacement remote part no. = 904010.
Is that the part number. I'm asking because the on-line supplier might have sold you the externally similar Novell remote.
Frankly, this unit could be up to 18 years of age, highly unlikely to be working anyway.
___________________________________
Amateurs assume, don't test and have problems; pros test first.
Read the installation manual, do a search here for your vehicle wiring. |
|
| Back to Top |
|
|
|
8o8supra
Joined: February 01, 2012
Location:
Hawaii,
United States
Posts: 3 |
| Posted: February 02, 2012 at 10:49 AM - IP Logged |
|
|
| yup its the DEI GENUINE part no. 904010 remote. It came with the DEI instructions. The alarm sems to be working fine cause it chirps when i try program and the auto arm & lock function works as well. All the fuses are good. |
|
| Back to Top |
|
|
|
|
If you wish to post a reply to this topic you must first login
If you are not already registered you must first register
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
