|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: 2000 gmc jimmy, viper 5902
|
  |
|
| Author |
|
|
trafficbuck
Joined: January 08, 2012
Location:
Missouri,
United States
Posts: 21 |
| Posted: January 16, 2012 at 9:13 PM - IP Logged |
|
|
Thank you Tedmond...
I wired the FT-6000AS Blade-TB to the 2000 GMC Jimmy SLT
It starts with the remote then shuts off because it does not sense the tach.
The Blade showed it learned by lighting green.
Also, the door looks do not work with the remote.
Guessing I need to wire in the tach and door lock/unlock |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
trafficbuck
Joined: January 08, 2012
Location:
Missouri,
United States
Posts: 21 |
| Posted: January 16, 2012 at 9:17 PM - IP Logged |
|
|
I forgot to ask...
Could the problems im having also be because I need to wire in the 2nd ignition relay (red wires Violet ground & relay) ? |
|
| Back to Top |
|
|
|
trafficbuck
Joined: January 08, 2012
Location:
Missouri,
United States
Posts: 21 |
| Posted: January 16, 2012 at 10:16 PM - IP Logged |
|
|
I wanted to make sure you all know that I did try the tach learn process.
And it does not work? |
|
| Back to Top |
|
|
|
tedmond
Joined: January 06, 2007
Location:
Ontario,
Canada
Posts: 3,843 |
| Posted: January 16, 2012 at 10:39 PM - IP Logged |
|
|
it it starts and shuts off it means you have a bypass issue. To learn tach start vehicle with key, step and hold the brakes, press start on the remote. the unit will click once to indicate tach learn.
the other problem is you used the wrong bypass. The correct bypass should have been the BLADE-AL. That would have done locks, triggers etc for you. It would have been a better route for your application. You have to hard wire the locks now.
___________________________________
Ted
P2W901SS
Compustar Pro Dealer
"If your girlfriend yells at the top of her lungs, is that SQ or SPL?" |
|
| Back to Top |
|
|
|
trafficbuck
Joined: January 08, 2012
Location:
Missouri,
United States
Posts: 21 |
| Posted: January 16, 2012 at 11:00 PM - IP Logged |
|
|
Ah, So The 2000 GMC Jimmy SLT will use the Blade-AL also?
Idatalink showed to use the Blade-TB...
I did the tach learn process you explained, it does not work keep getting 2 beeps not just 1 to indicate that it learned it. |
|
| Back to Top |
|
|
|
tedmond
Joined: January 06, 2007
Location:
Ontario,
Canada
Posts: 3,843 |
| Posted: January 17, 2012 at 7:14 AM - IP Logged |
|
|
the 2000 gmc jimmy would use the blade tb. the blade al would have done tach for you.
this is what you need to do, run the yellow/black tach input to an injector or tach. get the vehicle to start, then do door locks after.
___________________________________
Ted
P2W901SS
Compustar Pro Dealer
"If your girlfriend yells at the top of her lungs, is that SQ or SPL?" |
|
| Back to Top |
|
|
|
trafficbuck
Joined: January 08, 2012
Location:
Missouri,
United States
Posts: 21 |
| Posted: February 02, 2012 at 9:38 AM - IP Logged |
|
|
2000 GMC Jimmy SLT
Compustar FT 6000AS
While using the Blade AL
I get tach, dome light, door triggers, door lock
But I do not get unlock?
I also have the Blade TB That would require w2w
All the wiring diagrams that I have seen only show (+) for the door unlock and lock
The instruction for the FT 6000 AS
Call for the door locks, unlocks & trunck release to connect with a negative (-) 250mA
Please forgive me for the NOOB questions as this is my frist install.
Thank you all for all your help!!! |
|
| Back to Top |
|
|
|
trafficbuck
Joined: January 08, 2012
Location:
Missouri,
United States
Posts: 21 |
| Posted: February 02, 2012 at 9:46 AM - IP Logged |
|
|
Does this require bypass module?
If it does please let me know the best one.
Please help
Installing Viper 5902 in a 2000 GMC Jimmy. |
|
| Back to Top |
|
|
|
trafficbuck
Joined: January 08, 2012
Location:
Missouri,
United States
Posts: 21 |
| Posted: February 02, 2012 at 9:57 AM - IP Logged |
|
|
Thank you all for all the help...
The engine light comes on and stays on after I remote start the GMC Jimmy ???
I have reset the engine light witch will stay off until I use the remote start then it lights up again. Is this because I have not connected the 2nd ignition? |
|
| Back to Top |
|
|
|
metz35
Joined: January 13, 2003
Location:
Pennsylvania,
United States
Posts: 361 |
| Posted: February 02, 2012 at 10:43 AM - IP Logged |
|
|
The AL on that car does passlock and tach. That is it.
The TB does passlock only |
|
| Back to Top |
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
