|
|
the12volt's install bay
Mobile Electronics Forums |
|
Welcome Guest :) |
|
|
 Topic: cm5000, 2011 nissan xterra
|
  |
|
| Author |
|
|
newdriver
Joined: April 19, 2008
Posts: 11 |
| Posted: February 04, 2012 at 7:01 PM - IP Logged |
|
|
I am installing a CM5000 in a 2011 Nissan Xterra and i am getting the error-"key on in ignition". I've checked my wiring as well as the 2nd starter connections, and installed relay on the IPDM. The vehicle would not crank thought the module is trying to start it. Any help is appreciated. |
|
| Back to Top |
 |
|
|
Hi Guest
Not a member?
Register
Already
a member?
Sign In
|
|
|
|
metz35
Joined: January 13, 2003
Location:
Pennsylvania,
United States
Posts: 361 |
| Posted: February 04, 2012 at 7:11 PM - IP Logged |
|
|
Is error 3 flashes then 1 flash?
If so key on or ignition error is same as not programmed tach
Either program tach or change option 2-10
If it tries to crank you hooked up the relay wrong |
|
| Back to Top |
|
|
|
newdriver
Joined: April 19, 2008
Posts: 11 |
| Posted: February 04, 2012 at 7:50 PM - IP Logged |
|
|
| thanks, i just did the reset, programmed for tach, still no crank. anything else i might have missed or the module needs to be updated? |
|
| Back to Top |
|
|
|
metz35
Joined: January 13, 2003
Location:
Pennsylvania,
United States
Posts: 361 |
| Posted: February 04, 2012 at 7:54 PM - IP Logged |
|
|
| No crank at all? Does it turn on the ignition? What bypass did you use? |
|
| Back to Top |
|
|
|
newdriver
Joined: April 19, 2008
Posts: 11 |
| Posted: February 04, 2012 at 8:11 PM - IP Logged |
|
|
| no crank at all. ads-al(dl)-ni2 . wire to wire. module clicking when attempting. |
|
| Back to Top |
|
|
|
newdriver
Joined: April 19, 2008
Posts: 11 |
| Posted: February 04, 2012 at 8:12 PM - IP Logged |
|
|
| i can start with the ignition key but not with the remote starter |
|
| Back to Top |
|
|
|
newdriver
Joined: April 19, 2008
Posts: 11 |
| Posted: February 04, 2012 at 9:08 PM - IP Logged |
|
|
| when i put the key to ignition and remote start, it will start. does this have to do with the 2nd ignition? |
|
| Back to Top |
|
|
|
newdriver
Joined: April 19, 2008
Posts: 11 |
| Posted: February 04, 2012 at 9:10 PM - IP Logged |
|
|
|
| Back to Top |
|
|
|
offroadzj
Joined: June 03, 2005
Location:
New York,
United States
Posts: 1,240 |
| Posted: February 04, 2012 at 9:27 PM - IP Logged |
|
|
is the key just in the ignition (not turned) or is the key turned as well. Did you connect both starter and both accessory wires (only showing 1 ignition wire)? Did you use relays on both wires?
___________________________________
Kenny
Former Installation Manager
Circuit City Roadshop
Store #3160
Albany, NY 12205 |
|
| Back to Top |
|
|
|
newdriver
Joined: April 19, 2008
Posts: 11 |
| Posted: February 04, 2012 at 9:47 PM - IP Logged |
|
|
| thanks. the key to the on position and it starts. i connected both the stater and 2nd starter wires and only connected 1 acc wire. do i need to connect the 2nd acc wire? |
|
| Back to Top |
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
| |
Member List
Search
Register
Login
