I hope someone can help, I have to fix this fast.

I installed a DEI RS and I used a DEI 1100f bypass.  I hooked up all the wires for the bypass, Programed it and the RS worked fine, then I unplugged it so I could solder the connections.  Then I plugged the bypass back up and reset it , but when I was reprogramming put in the first key got the green light put in the 2nd key and pressing the program button on the bypass and then when I would go to RS it would crank but it would not turn over.

Does any one know how to solve this problem ?

OK i found out the answer to my questions.

Yes it is true you can only program a 6 to 8 keys for the Fords and after that you have to clear them out and then you start fresh and can program another 6 to 8 keys.