building custom box for w7

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / building custom box for w7 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dafreakinpope

Member - Posts: 1

Joined: November 16, 2010

Location: Connecticut, United States

Posted: November 16, 2010 at 9:24 PM / IP Logged

Hey guys, I currently have the jl wedge box for my 12in w7, but I saw they have a high output box for the w7. I want to build my own box, but I'm having problems with getting dimensions. Any help with the dimensons would be greatly appricated, by the way it's going in a 2006 chevy impala. Thanks again

Back to Top

newbreedbeatz

Member - Posts: 1

Joined: March 24, 2011

Location: Connecticut, United States

Posted: March 24, 2011 at 5:47 PM / IP Logged

heres the owners manual for that sub. it gives you recommended box size, with all the dimensions.following manufacturers specs is the best way to go for high bass output, with out building an spl style box. good luck!

http://mobile.jlaudio.com/pdfs/20309.pdf

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

building custom box for w7

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.