the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

fabricating dash pieces to cover holes


Post ReplyPost New Topic
< Prev Topic Next Topic >
gse25 
Member - Posts: 1
Member spacespace
Joined: January 02, 2011
Location: Ontario, Canada
Posted: January 02, 2011 at 3:19 PM / IP Logged  
Happy New Year everyone. Hoping to get tips on my current situation..
I have installed a double din system that currently looks like this.
fabricating dash pieces to cover holes -- posted image.
The obvious problem is that there are two "holes" after the install. I have done research on double din kits such as metra and scosche but nobody makes them for my car (Lexus IS250).
So the only solution now is to fabricate two pieces that will fill in those holes. Something similar to the bottom picture is what I want to achieve.
fabricating dash pieces to cover holes -- posted image.
However, I'm not sure how to go about doing that as I am limited in the tools that I have. Any suggestions as to how I can tackle this problem?
spmpdr 
Copper - Posts: 456
Copper spacespace
Joined: March 22, 2009
Location: Oregon, United States
Posted: January 06, 2011 at 11:27 AM / IP Logged  
Have you done f/g work before? If not i wouldnt suggest starting with those pieces. I would contact your local car audio shop and see if they could fab those for you, it shouldnt cost to much.
-A vision without a plan is just a hallucination-

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, March 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer