the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

sub box


Post ReplyPost New Topic
< Prev Topic Next Topic >
mikeboone 
Member - Posts: 13
Member spacespace
Joined: July 26, 2003
Posted: May 27, 2011 at 10:30 PM / IP Logged  
Hello it's been years since I built a box. I am building a wedge box for my brother inlaw and am having a brain fart. The box is 14" tall 60" wide,top board is 5 3/4" and bottom is 10". What are my 6 prices of wood need to be cut at? I can't figure it out and don't want to waste the 3/4 mdf sheet. Thanks for ur help.
mikeboone 
Member - Posts: 13
Member spacespace
Joined: July 26, 2003
Posted: May 27, 2011 at 10:32 PM / IP Logged  
Btw it is a late 60's chevy truck with jbl subs, but that doesn't matter. I have the dems I need.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer