2001 Nissan Xterra Existing Hood Pin?

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Nissan Xterra Existing Hood Pin? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Lockout

Member - Posts: 2

Joined: November 14, 2003

Location: United States

Posted: November 24, 2003 at 9:23 AM / IP Logged

I am looking to install a combo remote start/alarm into a 2001 Nissan Xterra. The xterra has a (-)hood pin Blk/PK. Will I have to isolate the connection with a diode, or would I be better servered installing and additional hoodpin.

Same question about the door pins.

Back to Top

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: November 24, 2003 at 9:52 AM / IP Logged

Use the factory switch that is already there and no diode is needed,good luck.

Back to Top

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: November 24, 2003 at 9:55 AM / IP Logged

In the xterra there is maybe 3 door trigger wires that all need to be connected and diode isiolated these wires are located at the secu this is a smart entrance control unit and is to the left of the brake petal. all the door lock wires and door trigger wires can be found there.

Back to Top

Lockout

Member - Posts: 2

Joined: November 14, 2003

Location: United States

Posted: November 25, 2003 at 4:10 PM / IP Logged

Thanks for this info, I will be trying this this weekend. One other questions would be if someone would have a complete wire list for the 2001 Nissan Xterra

Thanks in advance

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 Nissan Xterra Existing Hood Pin?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.