the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Automate AM2 Keyless entry


Post ReplyPost New Topic
< Prev Topic Next Topic >
mexi 
Copper - Posts: 156
Copper spacespace
Joined: August 23, 2003
Location: United States
Posted: April 12, 2005 at 4:16 PM / IP Logged  
Can someone walk me through the installation of a automate AM 2 on a 02 Impala. I need help with the relays on the door locks. How do I wire  the relays and  470 ohm resistor on the same wire. Thanks for any help!
mexicang
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: April 12, 2005 at 6:21 PM / IP Logged  

Not to hard..........Just make sure U have the correct wire

Try:   http://www.wiringinstructions.com/217.htm

** ORANGE / BLACK Door Lock Wire Must Receive A Ground (-) Pulse Thru A 470 Ohm Resistor To Lock And A Solid Ground (-) Pulse To Unlock

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
mexi 
Copper - Posts: 156
Copper spacespace
Joined: August 23, 2003
Location: United States
Posted: April 12, 2005 at 6:45 PM / IP Logged  
mo12v wrote:

Not to hard..........Just make sure U have the correct wire

Try:   http://www.wiringinstructions.com/217.htm

** ORANGE / BLACK Door Lock Wire Must Receive A Ground (-) Pulse Thru A 470 Ohm Resistor To Lock And A Solid Ground (-) Pulse To Unlock

Hate to ask a dumb question but can you draw me the diagram without the DLS . I will just be using relays . Thanks
mexicang
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: April 12, 2005 at 7:01 PM / IP Logged  

2 SPDT RELAYS:

LOCK:

PIN 87 = Ground
PIN 30 = 470 ohm Resistor to Vehicles ORANGE / Black wire
PIN 85 = Negative Lock Output from AM2
PIN 86 = Constant 12 volt ( + )

UNLOCK:

PIN 87 = Ground
PIN 30 = to Vehicles Orange /Black wire
PIN 85 = Negative UNLock Output from AM2
PIN 86 = Constant 12 volt ( + )

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
mexi 
Copper - Posts: 156
Copper spacespace
Joined: August 23, 2003
Location: United States
Posted: April 12, 2005 at 7:33 PM / IP Logged  
mo12v wrote:

2 SPDT RELAYS:

LOCK:

PIN 87 = Ground
PIN 30 = 470 ohm Resistor to Vehicles ORANGE / Black wire
PIN 85 = Negative Lock Output from AM2
PIN 86 = Constant 12 volt ( + )

UNLOCK:

PIN 87 = Ground
PIN 30 = to Vehicles Orange /Black wire
PIN 85 = Negative UNLock Output from AM2
PIN 86 = Constant 12 volt ( + )

What aboutthe trunk pop and horn honk? What other wires do I have to connect? I know I dont have to connect all of them . I just want to make sure .
mexicang
mexi 
Copper - Posts: 156
Copper spacespace
Joined: August 23, 2003
Location: United States
Posted: April 12, 2005 at 7:34 PM / IP Logged  
mo12v wrote:

2 SPDT RELAYS:

LOCK:

PIN 87 = Ground
PIN 30 = 470 ohm Resistor to Vehicles ORANGE / Black wire
PIN 85 = Negative Lock Output from AM2
PIN 86 = Constant 12 volt ( + )

UNLOCK:

PIN 87 = Ground
PIN 30 = to Vehicles Orange /Black wire
PIN 85 = Negative UNLock Output from AM2
PIN 86 = Constant 12 volt ( + )

What about the trunk pop and horn honk? What other wires do I have to connect? I know I dont have to connect all of them . I just want to make sure .
mexicang
mexi 
Copper - Posts: 156
Copper spacespace
Joined: August 23, 2003
Location: United States
Posted: April 12, 2005 at 7:34 PM / IP Logged  
mo12v wrote:

2 SPDT RELAYS:

LOCK:

PIN 87 = Ground
PIN 30 = 470 ohm Resistor to Vehicles ORANGE / Black wire
PIN 85 = Negative Lock Output from AM2
PIN 86 = Constant 12 volt ( + )

UNLOCK:

PIN 87 = Ground
PIN 30 = to Vehicles Orange /Black wire
PIN 85 = Negative UNLock Output from AM2
PIN 86 = Constant 12 volt ( + )

What about the trunk pop and horn honk? What other wires do I have to connect? I know I dont have to connect all of them . I just want to make sure .
mexicang
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: April 12, 2005 at 8:12 PM / IP Logged  

Constant 12 voltsREDIGNITION SWITCH HARNESS
Ignition 12 voltsPINKIGNITION SWITCH HARNESS
StarterYELLOWIGNITION SWITCH HARNESS
Dome LightD BLUE/WHITE (-)B.C.M. IN DRIVER KICK PANEL *
Trunk Pin SwitchRED / BLACK (-)AT LIGHT IN TRUNK OR BCM
Parking LampBROWN / WHITE (+)AT JUNCTION BLOCK IN PASSENGER KICK
Power LockORANGE / BLACKAT BCM ON DRIVER SIDE **
Power UnlockSINGLE WIRE SYSTEMOF INST PANEL
* DARK BLUE - Pin A1 Conn.C1 Also At B.C.M In Gray Plug On Left Hand Side. (Alternate Dome Lt. Connection). ** ORANGE / BLACK Door Lock Wire Must Receive A Ground (-) Pulse Thru A 470 Ohm Resistor To Lock And A Solid Ground (-) Pulse To Unlock.
Single Wire Resistor Door Locks

Accessories
Window UpD\ D BLUE P\ L BLUE D\ D GREEN P\ L GREEN @ MAIN SWITCH
Window DownF/ BROWN F/ TAN R/ PURPLE R/ PURPLE
Ign Key WarnL GREEN (-)STEERING COLUMN HARNESS OR BCM
Trunk ReleaseL BLUE (+) *AT BCM ON DRIVER SIDE INST PANEL
OEM HornBLACK (-)STEERING COLUMN HARNESS OR BCM
HeadlightsYELLOW (-)AT HEADLIGHT SWITCH OR BCM
OEM Alarm ArmN/A
OEM Alarm DisarmLT GREEN (-)AT BCM ON DRIVER SIDE INST PANEL

* Trunk Release Alt conn:BLACK (-) At Switch Just To The Left Of The Column. 

Reversal Rest At Ground Power Window Circuit
Positive Pulse Trunk Release

Remote Start
Tach SignalWHITEAT IGNITION CONTROL MODULE * #238
Ignition #2D GREENIGNITION SWITCH HARNESS
Ignition #3ORANGEIGNITION SWITCH HARNESS (HVAC)
AccessoryBROWNIGNITION SWITCH HARNESS
Neutral SafetyNOT GROUNDING TYPE -OEM SWITCH OPENS STARTER CIRCUIT
Brake LightWHITE (+)AT SWITCH ABOVE BRAKE PEDAL
Reverse LightL GREEN (+)AT LIGHTS
Rear Window DefrostN/ATIMER BUILT INTO SWITCH

* Ignition Control Module Is Located On Top Of Engine. 

GM PassLock II  ** Pass Lock Wires Are 22 Gage YELLOW,BLACK,WHITE Behind The Radio With The Ignition Wires Note : The Engine Will Not Turn Over Until The PassLock Is Connected

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
mexi 
Copper - Posts: 156
Copper spacespace
Joined: August 23, 2003
Location: United States
Posted: April 13, 2005 at 2:10 PM / IP Logged  
Hey I wired It as u said with the 470 ohm resistor and lock will not work. any ideas ?
mexicang
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: April 13, 2005 at 3:32 PM / IP Logged  

Does UNLock work??

R your Relays working?
Is the AM2 sending NEGATIVE Pulse?

Be sure you have 470 ohm resistor and a good GROUND.

U can also hook resistor direct to ORANGE / Black wire & Ground other side of resistor to try it.

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer