the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

02 Explorer Tailgate Glass Release


Post ReplyPost New Topic
< Prev Topic Next Topic >
mheym56820 
Member - Posts: 5
Member spacespace
Joined: May 19, 2005
Location: United States
Posted: May 20, 2005 at 11:09 AM / IP Logged  

OK New question here,

The installer did not hook up the tailgate glass release. From the DEI wiring it shows that on the CSM the wire is org/lt grn or pur/yel. + Can you tell me what wire I need to connect from the brain to this wire at the CSM and also if a relay or anything is nescessary. I just don't know what to believe from the installer, he wants to charge an extra 50 to install this feature which I think should have been done the 1st time around since the factory remote has the feature and there is no other way to open that stupid glass. I have the Clifford Matrix RS3.5 From looking at the install guide, I think that it is the RED / White on Primary harness 1 connector #12 which is outputting -. What are you guys using to invert the signal since it looks like I will need a + pulse for the feature to function. Thanks again for all of your help. Ps I am an electronics tech by trade but I have just never jacked around with alarm installation so I would rather hear from some people that have experience with these installations.

Mike
mheym56820 
Member - Posts: 5
Member spacespace
Joined: May 19, 2005
Location: United States
Posted: May 20, 2005 at 11:17 AM / IP Logged  
OK I am pretty sure that I will need a relay of some sort to invert the - signal to the + Can you give me any ideas as to what type of relays you guys use. Maybe something I can buy at the local Radio Shack? My focus in electronics has primarily been digital so I am not sure what type of relay that I need to look for.
Mike
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: May 20, 2005 at 3:17 PM / IP Logged  

SPDT RELAY:

https://www.the12volt.com/relays/page1.asp

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer