the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Adding new keyless push button start?


Post ReplyPost New Topic
< Prev Topic Next Topic >
silver_gs 
Member - Posts: 15
Member spacespace
Joined: March 18, 2006
Location: Canada
Posted: March 18, 2006 at 8:02 AM / IP Logged  
Has anyone considered updating their car with the new
1. Keyless push button start and
2. Keyless remote entry (just by being close to the car, the car unlocks - you don't deliberately have to press unlock on your remote control)?
I want to incorporate the push button start on the dash, covering up the existing keyhole in the steering column and install some sort or RFID or other technology in the doors so that they open automatically when I am close to the car and automatically lock when I go away.
Obviously the system has to be secure such that the car will not start if someone breaks in.
My car is a 99 Lexus GS400 and it comes with a factory alarm and the key fob has a chip in it that the car recognizes and then it starts. Based on the little knowledge I have I know that as long as you have an aftermarket alarm installed with engine kill , then the start button can be disabled whenever the alarm is on and the doors are also locked at that point.
As far as the key chip, you just need to remove the chip from the key and tie wrap it around the base of the key hole. There is enough room underneath the dash panel to do this.
The chip will not allow the ignition to start unless it is right up against the ignition module. Placing a key behind the dash anywhere else is not going to do it. It's not close enough.
I don't know anything about electronics and would not even consider this remotely a DIY task for myself. I would need some local installers help with this. I live in Oakville, Ontario.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 18, 2006 at 8:22 AM / IP Logged  
This is what I would do to retain ALL the security features of the system and on top of it this will give you all the bells and whistles you want + more........
Go buy a Compustar 2W8000FM-AS or 2W900FM-AS and a universal bypass module ( TBKIII or TBKIV ). Here's how it works, the Compustar system has a feature on there that will auto lock and unlock + arm & disarm the alarm system within 50 feet of the vehicle. THis feature can be turned on or off with the press of the button. Great feature and the remote control is also a two way communication device taht lets you know if the car is being tampered with or not through audible beeps, vibration & also visual Indiglo backlighting.
Now, the TBKIII/TBKIV is a universal module that induces the signal of the chip in the head of the key to allow the starting of the vehicle without having a key in the ignition. You can install this so that it will work with the remote start feature of the Compustar & also have it so that it will work with a push button starter system.
The idea is not new, but takes some knowledge of how the ignition system works. This way of doing what you want retains all security aspects of the OEM system and also leaves the anti-theft system of the Lexus intact. Also, this route gives you remote start feature that you would not have in the first place, a security ststem that can integrate with the OEM system & also gives you 2 way comminucation between you and the vehicle up to 5000 feet away. Everyone wins !Adding new keyless push button start? -- posted image.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
silver_gs 
Member - Posts: 15
Member spacespace
Joined: March 18, 2006
Location: Canada
Posted: March 18, 2006 at 8:34 AM / IP Logged  
Wow! That was a very fast and very detailed reply! Thanks!
Now I need to find a good local installer to do this for me. Anybody in the GTA that can do this?
I just did a search on ebay and found the alarm but not the bypass module. The alarm itself is less than US$200.00.
The push button can be bought for under $100.00. Now I just need someone good at this to get it done!
Adding new keyless push button start? -- posted image.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 18, 2006 at 8:47 AM / IP Logged  
No problemo dude. Try not to go on eBay to purchase stuff liket his as there is no warranty from any of these sellers regardless of what they say. Firstech will not honor any claims from anyone who sells from eBay. Your probably looking at about $ 250-400 to get this installed in the GTA seeing that it's more expensive to get stuff like this done over in TO. We would charge about $ 275 for installation of this nature.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
silver_gs 
Member - Posts: 15
Member spacespace
Joined: March 18, 2006
Location: Canada
Posted: March 18, 2006 at 8:59 AM / IP Logged  
I just posted that price on ebay because that was the quickest way to find the price.
I always try to buy stuff like this from a retailer instead for warranty issues just like you pointed out above.
I need to find a more affordable installer and then can do this mod.
silver_gs 
Member - Posts: 15
Member spacespace
Joined: March 18, 2006
Location: Canada
Posted: March 18, 2006 at 9:38 AM / IP Logged  
I was just reading another thread where someone else had this alarm installed in his Scion tC and the nightmare he was running into.
I need to find an installer who knows how to install Compustars very well.
What questions should I ask a potential installer to figure out if they know the Compustars very well or not?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer