Viper 791XV cranks during Valet Take-Over

Home / the12volt's Install Bay / Car Security and Convenience / Viper 791XV cranks during Valet Take-Over (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jnice

Member - Posts: 6

Joined: December 04, 2006

Location: United States

Posted: December 05, 2006 at 9:46 PM / IP Logged

I just got done installing the alarm in my Cherokee. For some reason (not everytime) when I perform the Valet-TakeOver, it cranks until I shut it down by brake etc.

I press the * button twice, and sometimes it will go back into remote start like it should, other times it just cranks! Anyone have any experience with this?

Do it right the first time

Back to Top

mauri197

Copper - Posts: 80

Joined: October 24, 2006

Location: United States

Posted: December 05, 2006 at 10:52 PM / IP Logged

make sure you have the correct tach wire i had that happen to me once my connection on my tach wasnt so ggod it would see sometimes and sometimes it wouldnt especially when i tried to do pit stop sounds like a tach problem to me but double check everything what year cherroke is this

Back to Top

jnice

Member - Posts: 6

Joined: December 04, 2006

Location: United States

Posted: December 06, 2006 at 8:12 PM / IP Logged

It is a 96. Yeah I thought that too at first, but when I did the tach learning it was good, led came on steady like it should. Shouldn't the alarm know that it is running from the ignition wires? I know it senses the tach, but it should know that it is already running and not crank right?

Do it right the first time

Back to Top

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: December 06, 2006 at 8:32 PM / IP Logged

Where'd you pick up the tach signal? Is it a regular cherokee or grand cherokee?

Cause I'm So white and nerdy...

First Class Certi-fried installer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 791XV cranks during Valet Take-Over

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.