the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1994 delco bose wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
lonewolfnz 
Member - Posts: 1
Member spacespace
Joined: July 29, 2004
Location: New Zealand
Posted: July 29, 2004 at 7:15 PM / IP Logged  

I have a 94 chev camaro with the origanal radio/tapedeck unit which im looking at replacing.

though i need a wiring guide for to check out  the wiring system.

I live in New Zealand so access to this information is some what imposable.

 the car manual i have is all in japanese , can anyone help me out or know of any links i can locate a guide for this , pdf or anything .

sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: July 29, 2004 at 9:20 PM / IP Logged  
The factory BOSE system in your car can't really be added or modified. You would be better off replacing the deck and all the speakers.   In 94' GM cheaped out and only put in two front door speakers and a sub in the left rear hatch. You can replace the door speakers with aftermarket ones, but you need to run new wires as the original ones had an amp attached to the speaker mounting plate in each door. The rear side panels can also accomodate 6&1/2 inch speakers. All you can really re-use from the factory is the antenna. Everything else isn't going to work with aftermarket gear. Think of it as having a clean slate to work from.
sparky

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer