the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Help on Kicker 1200.1 and 2 15s


Post ReplyPost New Topic
< Prev Topic Next Topic >
Xgen.m@$t3r 
Member - Posts: 27
Member spacespace
Joined: April 29, 2004
Location: United States
Posted: August 05, 2004 at 8:12 PM / IP Logged  

I'm getting 1 kicker kx1200.1 and wanted to see if someone could help me find a cheaper 1/0 guage installation than I have found..

I also would like to see if anyone has any idea how I can run my 1 15" Kicker CVR and a Kicker Comp until I get another 15" Kicker CVR.  Thats 3 4ohm subs, I need them to come out to be 1ohm, but have no idea how I can do it without 2 15" Kicker CVR's.

Thx

Xgen.m@$t3r 
Member - Posts: 27
Member spacespace
Joined: April 29, 2004
Location: United States
Posted: August 05, 2004 at 8:19 PM / IP Logged  
This is a few of my pictures of my current setup of subs, 2 15"sHelp on Kicker 1200.1 and 2 15s -- posted image.
Xgen.m@$t3r 
Member - Posts: 27
Member spacespace
Joined: April 29, 2004
Location: United States
Posted: August 05, 2004 at 8:20 PM / IP Logged  
This is a few of my pictures of my current setup of subs, 2 15"sHelp on Kicker 1200.1 and 2 15s -- posted image.Help on Kicker 1200.1 and 2 15s -- posted image.
Herald 
Member - Posts: 46
Member spacespace
Joined: May 08, 2004
Location: United States
Posted: August 05, 2004 at 8:22 PM / IP Logged  

try www.knukonceptz.com good stuff better price

A person who carries or proclaims important news; a messenger.
Xgen.m@$t3r 
Member - Posts: 27
Member spacespace
Joined: April 29, 2004
Location: United States
Posted: August 16, 2004 at 10:46 PM / IP Logged  

Anyone have any idea how I can hook 3 4Ohm subs to this amp to get the most power?

Charles_R_H 
Copper - Posts: 122
Copper spacespace
Joined: May 15, 2004
Location: United States
Posted: August 18, 2004 at 11:49 AM / IP Logged  
if you run the compvr 15 and the comp 15 you can take it down to 1.33 ohms, i wouldn't suggest using the 2 different subs, if  you run just the 2 comp vr's you can get down to one ohm, i would just run the two comp vr's at one ohm.  or run four comp vrs, but you will run short on power
electronics run off of smoke, when you let the smoke out they stop working
Xgen.m@$t3r 
Member - Posts: 27
Member spacespace
Joined: April 29, 2004
Location: United States
Posted: August 18, 2004 at 5:20 PM / IP Logged  

Well until I get another 15" CompVR I need to know how, and what will allow my amp to give the best power for a 15"Kicker CompVR and a 15"Kicker Comp...   I know the Kicker KX1200.1 will do the following:

* 300 watts RMS x 1 at 4 ohms

* 600 watts RMS x 1 at 2 ohms
* 1200 watts RMS x 1 at 1 ohm
* Stable at 1 ohm

Both subs are 4 ohm... But each coil is 4Ohms.. And that means 3 coils should be hooked up... so If I go ahead and hook them up to where they pull 1.33 what will that be doing?  What wattage?  Would it be between 600 and 1200 RMS?


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, March 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer