vented box in a wedge?

Home / the12volt's Install Bay / Car Audio / vented box in a wedge? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mini14

Copper - Posts: 120

Joined: December 31, 2004

Location: United States

Posted: April 23, 2005 at 10:42 PM / IP Logged

has anyone made a vented box in a wedge? i want to use all the space i can an a wedge would do just that. any help?

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: April 23, 2005 at 10:57 PM / IP Logged

Not much more difficult than a standard rectangular box. You know about the wedge calculators on this site, left column under "volume calculators"?

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Back to Top

mini14

Copper - Posts: 120

Joined: December 31, 2004

Location: United States

Posted: April 23, 2005 at 11:46 PM / IP Logged

well yea i saw that and calculated internal volume, but i was wondering about the vent. this will be my first box and i want it to downfire. would the vent face down? how would you all recommend making this box?

Back to Top

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: April 24, 2005 at 12:13 AM / IP Logged

leave enough space at the bottome of the box between the floor to equal the port diameter minimun, besdies that all is the same, you might want to check one of the sage calculators to make sure your sub is appropiate for downward firing

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vented box in a wedge?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.