Removing Factory amp

Home / the12volt's Install Bay / Car Audio / Removing Factory amp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Dsteinmann

Copper - Posts: 75

Joined: January 01, 2005

Posted: November 26, 2005 at 11:09 AM / IP Logged

I want to remove the factory amp in a 99 300m whats the easy way to get the wires reconnected?

Back to Top

rottenbelly

Copper - Posts: 99

Joined: July 29, 2005

Location: United States

Posted: November 26, 2005 at 7:17 PM / IP Logged

Most companys that make install kits make factory amp bypass connectors. Let the hunt begin!

rottenbellys 05 crew cab colorado.Pioneer dehp 880prs, kenwood excelon in all 4 doors. Bazooka 500 mono Jl 10w3 in coustom center console box.

Back to Top

opy1095

Member - Posts: 48

Joined: October 04, 2003

Location: United States

Posted: November 26, 2005 at 9:04 PM / IP Logged

are u gonna add an aftermarket amp and/or headunit?

Back to Top

Dsteinmann

Copper - Posts: 75

Joined: January 01, 2005

Posted: November 27, 2005 at 2:50 PM / IP Logged

headunti and amp,

Back to Top

godblessdremil

Silver - Posts: 273

Joined: August 03, 2005

Location: United States

Posted: November 27, 2005 at 4:25 PM / IP Logged

two ways to bypass the amp, bolth basacally do the same thing. One run speaker cable to the amp, and just disconnect the speakers from the amp and connect them to said wires, then use the other end for your purpose(eather hooking it up to an amp or a head unit). The other is to buy a plug from anyone who makes harnesses and use that. The advantage to that you keep the factory harness intact, no possibillity of mistake since its just match up colors, disadvantage to previous is its slightly more expensive.

Back to Top

Search for other posts by godblessdremil

ssnds

Copper - Posts: 169

Joined: August 15, 2005

Location: United States

Posted: November 27, 2005 at 5:40 PM / IP Logged

i would just install the HU, run new speaker wires from all the speakers to the trunk (where the amp would be). or i am guessing you could fight out which wires on the amp are for which speakers.. and go that route.

was that any help? k thanks

SSounds

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Removing Factory amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.