the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

window controller using viper 211hv


Post ReplyPost New Topic
< Prev Topic Next Topic >
mikedero08 
Member - Posts: 6
Member spacespace
Joined: February 16, 2009
Location: Illinois, United States
Posted: November 05, 2012 at 2:50 PM / IP Logged  
I purchased a Viper 211HV for my 1991 Mustang GT and I wanted to use the AUX button to control my windows.
When the windows are up, I want the AUX button to roll them down, and when the windows are down, I want the AUX button to roll them up.
Right now, the AUX is intended to pop the trunk, however I no longer have an actuator back there and I have zero intentions of installing one. I believe its a single short pulse signal so I need to make a relay box and I need some kind of set up that can either identify when the windows are up/down, or switch back and forth between two separate relays that control up and down. I believe the latter would be easier but I do not know how to make it automatically switch between the up and down relays after each press of the AUX button.
I hope this makes sense. Thanks in advance for any help at all.
shortcircuit161 
Silver - Posts: 556
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: August 29, 2010
Location: United States
Posted: November 05, 2012 at 3:57 PM / IP Logged  
The 211HV actually has 2 outputs you can use. Chan 2 (RED / white wire) which is meant for the trunk and Chan 3 (WHITE/ blue) which is an extra channel. The system also has an Orange Ground When Armed wire.
You can get a window roll-up module like the DEI 530T and control both windows to to up and down with Chan 2 & 3 and also have the keyless entry system roll them all up when you lock the car.
mikedero08 
Member - Posts: 6
Member spacespace
Joined: February 16, 2009
Location: Illinois, United States
Posted: November 06, 2012 at 3:07 AM / IP Logged  
I looked into that DEI 530T module and it sounds like what I am looking for. Only a couple things. The first spare channel (AUX) can be used with the 530T to only roll the windows up OR down, not both correct? The second channel, ground when armed, would control another specific function when the doors are locked with the remote, but only one? Would my windows roll up every time I lock the doors or do I have to press the lock button twice to roll them up?
Once again, sorry if that is hard to understand.
Thank you.
mikedero08 
Member - Posts: 6
Member spacespace
Joined: February 16, 2009
Location: Illinois, United States
Posted: November 06, 2012 at 3:09 AM / IP Logged  
My remote only has one AUX button by the way. Its lock, unlock, AUX and panic. Can you explain how each channel is switched?
shortcircuit161 
Silver - Posts: 556
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: August 29, 2010
Location: United States
Posted: November 06, 2012 at 7:40 AM / IP Logged  
The 530T can be connected to close the windows every time you hit lock on the Viper remote with the GWA wire connected. If you hit Aux first, then lock, it will lock the car but not trigger the 530T to close the windows. If you want to control the windows strictly thru the remote and not ever when locking the car, you wouldn't connect the GWA wire to the 530T.
Instead you would use just the two Aux inputs as shown in the install manual for the 530T. One Aux input rolls the 2 windows up and the other Aux rolls them down.
The 211HV keyless system has 2 Aux outputs. The remote uses the AUX button for Channel 2 and Lock/Unlock pressed together for Channel 3.
mikedero08 
Member - Posts: 6
Member spacespace
Joined: February 16, 2009
Location: Illinois, United States
Posted: November 06, 2012 at 1:03 PM / IP Logged  
Fantastic! Thank you for that information!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer