the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 jeep tj


Post ReplyPost New Topic
< Prev Topic Next Topic >
ctc345 
Member - Posts: 11
Member spacespace
Joined: January 07, 2006
Location: Canada
Posted: January 07, 2006 at 11:27 AM / IP Logged  
i installed a pro start in a 2000 tj it all works good but the problem is when its started by the remote and you turn the ignition on and step on the brake the theft light come on and flashes.any ideas??? i used a tb 350 transponder by pass. wired to 12 v + and ground out - when running.like i said it works great except for that.
jacqueslacombe 
Copper - Posts: 124
Copper spacespace
Joined: December 04, 2005
Location: Canada
Posted: January 08, 2006 at 4:27 AM / IP Logged  
Well  make sure the 12 volt  is constant  and the( ground out )is the white one  beside that  it should be right
cocolaboy

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer