2015 Ford Transit Stereo Install

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2015 Ford Transit Stereo Install

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pcbytc

Member - Posts: 2

Joined: January 02, 2016

Location: South Carolina, United States

Posted: March 25, 2017 at 10:13 PM / IP Logged

Getting annoyed with this one, I have a 2015 Ford Transit connect, no 4.2" screen, BASE crappy stereo, but it works. (I am replacing with a Kenwood)

I had to get the METRA Kit for 2014, with the dials for the vents, which more-or-less fits.

Now here is my issue, I was told to use the XSVI-5524-NAV to retain Accessory output, problem is, it's not outputting anything.

I later read that I MUST have the factory 4.2" screen for that interface to work?

Can someone provide a little assistance? I'm an ex-installer and I know my way around a dash, but I'm not sure if there is a correct solution to this?

-Tim

rtfm

Back to Top

pcbytc

Member - Posts: 2

Joined: January 02, 2016

Location: South Carolina, United States

Posted: March 26, 2017 at 7:52 AM / IP Logged

Never mind, I tried the 70-5524 and it worked fine.

Arrrrrrg.

rtfm

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.