heated seat in ’91 nissan maxima

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=115201
Printed Date: October 31, 2024 at 7:18 PM

Topic: heated seat in ’91 nissan maxima

Posted By: *chit*
Subject: heated seat in ’91 nissan maxima
Date Posted: July 20, 2009 at 9:09 PM

wanting to install heated seats elements into my '91 maxima. are there any tricks i should know or is there a proper route i should follow in regards to the wiring? any hints will be appreciated.

Replies:

Posted By: i am an idiot
Date Posted: July 21, 2009 at 11:25 PM

Are you purchasing some kind of kit?

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: *chit*
Date Posted: July 22, 2009 at 9:42 PM

I have no kit i just ended up with the seat elements out of a wrecked murano and considered installing them in my car if not too much hassle involved. Do those pads run full twelve volts or are they run down to much less?

Posted By: i am an idiot
Date Posted: July 22, 2009 at 9:50 PM

How many elements do they have in each seat? Are there 2 wires per element? I am sure that on High they are fed 12 volts.

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: *chit*
Date Posted: July 26, 2009 at 11:02 PM

Awesome thanks. It is two seperate elements (back and bottom) joined by the wiring harness which ends in a three wire plug. Once i figure which wire does what they'll be goin in.

Posted By: i am an idiot
Date Posted: July 26, 2009 at 11:32 PM

Chances are there is a common ground and a hot for each element. Do you have an Ohm meter?

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Posted By: *chit*
Date Posted: July 27, 2009 at 6:39 PM

Yes i do and that will tell the tale.

Print Page | Close Window