I am looking for someone here who has access to directechs online manuals.
I am not asking for any logon credentials I am simply asking someone who has access to their site to get me the install manual for the Python 991 remote starter. The manual on this site does not match my model exactly. It appears there have been different versions of the 991 and the wiring harness on mine does not match the one listed on this sites manual.
If you have access and would be willing to look this up for me please PM me and I will get you anythign specifics you may need.
Thank you
KJ
The wires it came with are.
2 wire Blue, Green with 1 clip
18 wire clip as follows
GREEN/ black
ORANGE / black
GREEN / WHITE
BLACK/ purple
WHITE/ black
WHITE/ purple
gray/black
BROWN / black
BLACK/ WHITE/ purple
--------
blue
ORANGE / white
orange
dark blue
pink
gray
blue/white
brown
BLACK/ white
2 wire on/off switch with clip
long black wire (responder/antenna) 6 wire, green clip one side with pink,green,red,black,blue, gray wires and other side is smaller black clip
main 9 wire clip wires are
pink
RED / white (fuse)
orange
purple
green
-----
red (fuse)
pink/white
pink/black
RED / black (fuse)
12 wire clip wires are
orange
white
WHITE/ blue
BLACK/ white
green
blue
purple
black
WHITE/ brown
brown
red (fuse)
RED / white
Go to this link:
https://www.the12volt.com/installbay/downloads.asp?srch=all&term=viper&page_no=2 and download the Viper 5701 with new style H2 Connector. This will have the info for the 18 pin connector, which is a combination of a 8 pin and two 5 pin connectors from earlier models.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Thank you that looks like it will at the very least help out. If any of you still have access and can get the exact manual please let me know. In the mean time I will use the 5701 and the new 991 manuals to try and locate and wire everything.
Thanks
KJ