2010 express ignition controled circuits
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136696
Printed Date: May 02, 2024 at 6:52 PM
Topic: 2010 express ignition controled circuits
Posted By: attis
Subject: 2010 express ignition controled circuits
Date Posted: May 26, 2014 at 10:52 AM
I have a 2010 Chevy Express 3500 . I want to add a relay that is controlled by the ignition switch. I have gone through most of the mini-fuses and have found none that are actually controlled by the switch. What can I do that is simple?
-------------
ATTIS
Replies:
Posted By: Ween
Date Posted: May 26, 2014 at 11:04 AM
https://www.gmupfitter.com/files/media/photo/475/2009_LD_ElectricalFullSizeVans_100813.pdf
go to page 105, that should help you out.
Posted By: attis
Date Posted: May 27, 2014 at 10:19 PM
Looks like the best bet yet. Thanks!
-------------
ATTIS
Posted By: attis
Date Posted: May 30, 2014 at 2:48 PM
Although the body fuse box for the 2009 is apparently not the same as it is on my 2010, i think that you are making reference to my tapping one of the J-case fuses.
I am not certain that I know how tap in.
-------------
ATTIS
Posted By: Ween
Date Posted: May 30, 2014 at 5:34 PM
The GM upfitter website shows the fuse box for both years as pretty much identical. If there is a J-case fuse port open that tests as ignition, crimp a female tab terminal on a fuseholder lead and insert into port.
Posted By: attis
Date Posted: May 30, 2014 at 10:02 PM
I'll give that a try. Thanks!
-------------
ATTIS
Posted By: Ween
Date Posted: May 30, 2014 at 10:37 PM
look at the upfitter body builder guides ...electrical section. see if you can identify the body fusebox
|