Need to dim two 12V led’s

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138754
Printed Date: April 28, 2024 at 4:46 PM

Topic: Need to dim two 12V led’s

Posted By: danton
Subject: Need to dim two 12V led’s
Date Posted: April 01, 2015 at 4:55 AM

Hello,

I have two led's shining on my license plate but these are too bright.

Is there a possibility to dim these?

Thanks!

Replies:

Posted By: i am an idiot
Date Posted: April 01, 2015 at 9:26 AM

Try running them in series. Maybe a thin layer of clear silicone. Maybe a thin layer of black silicone.

Posted By: danton
Date Posted: April 01, 2015 at 9:37 AM

You got me thinking... A vinyl film sheet!

Posted By: tillithz
Date Posted: May 18, 2015 at 7:52 AM

grab an led/resistor calculator and figure out a resistor thatll do it.

Print Page | Close Window