fuse box problem
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16374
Printed Date: May 28, 2024 at 10:32 PM
Topic: fuse box problem
Posted By: jlseven
Subject: fuse box problem
Date Posted: July 16, 2003 at 12:21 PM
i hardwired my radar detector to my fuse box using a fuse blade tap. i first tried the radio fuse, but the detector wouldn't shut off when the car was turned off. i then tried the airbag fuse and it worked. the problem is that the tap widened the space for the radio fuse to the point that the fuse is loose and the only way to make the connection is to leave the tap in. is there any way to tighten the connections for the loose fuse?
Replies:
Posted By: Velocity Motors
Date Posted: July 18, 2003 at 11:42 PM
take a needle pick and pry the terminals closer.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: copcarguy
Date Posted: July 19, 2003 at 9:27 AM
put another fuse tap in where you pulled it out and just don't use it.
-------------
R Jackson
Owner/Installer
TRM Emergency Vehicles
Information is advice only and should be confirmed with OEM or quality test equipment.
Boyertown, Pennsylvania
Posted By: jlseven
Date Posted: July 22, 2003 at 12:47 PM
thanks for the help 
|