Hi all I am new hear n it looks like a good place
But on to my ? I have a dodge ram 1500 quad n the other night when i shut it down the raido wouldn't go off pulled the fuse for the night .lol. Looked into it a bit the next day an have found that the int lights don't work when i use my factory door remote like they use to n it seems that lots of acc power things do with the keys off now like cig lighter mirrors .Any help would be appriatedget me a head start I have a prety good under standing of wiring so should b able to fix it but lookin for a good head start from more knowlegable people
Thanks in advance Dan
Check your fuses.
Sounds like a relay is stuck.. power everything up then shut down and tap every relay you can find.. listen for a buzz or a click.. It could be a bad ign switch too.... with the key out you should have no power to the accy wires in the harness...
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Thanks all for the replys
All fuses r good pulled every relay an fuse no change yet will keep n update going any other leads all
Thanks
what year is your truck? many of the new vehicles have the stereo wired so it stays on until the drivers side door is opened. do not know about the acc problem but this may be the stereo problem.
-------------
Cpl Moose
USMC Iraq
thanks but it is a 99 and i think that opt didn't come in till 03 but thanks just the same
I am leaning towards the CTM (central timer mod ) or also called the body mod
have seen somany elect probs with theys dodges after lookin thru the net leads me to belive that dodge had a poor grounding practice for this truck and things just burn out as well as using just high enough grace of wire any changes just burn em up
thanks but it is a 99 and i think that opt didn't come in till 03 but thanks just the same
I am leaning towards the CTM (central timer mod ) or also called the body mod
have seen somany elect probs with theys dodges after lookin thru the net leads me to belive that dodge had a poor grounding practice for this truck and things just burn out as well as using just high enough grade of wire any changes just burn em up