Print Page | Close Window

hope someone can slot port

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=118116
Printed Date: October 31, 2024 at 6:33 PM


Topic: hope someone can slot port

Posted By: reflective2010
Subject: hope someone can slot port
Date Posted: November 30, 2009 at 9:22 AM

Hi everyone, I usually just build fiberglass ensclosures but im just building a regular square box for my wifes trailblazer. This is the outside deminsions i was going to make it. Its for one single 12"

16.75 wide / 19.75 high / 19.75 long

looks like thats about 2.7 cu feet the with the speaker displacment of 0.18  looks like 2.939 without speaker displacement.  manual calls for anywhere from 2.3 cu feet to 3.7 for ultimate spl. so i was thinking the 2.7 should be fine. could be alittle longer if needed.

i have no clue how to calulate the square port ? does it change the inside box volume? if some one could give me some ideas it would be great. manular said for the 2.3 cu feet box tune to 38 hz. Thanks so much i appericate it.




Replies:

Posted By: pcana11
Date Posted: November 30, 2009 at 8:29 PM
i believe you calculate the port in with the box. try pm'ing j.reed and ask him. just look at one of the forums under car audio. he helped me a lot

-------------





Print Page | Close Window