wires in trunk enclosure
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=122309
Printed Date: April 24, 2024 at 7:59 PM
Topic: wires in trunk enclosure
Posted By: hayabusa02
Subject: wires in trunk enclosure
Date Posted: June 15, 2010 at 5:52 AM
My question is if you fiberglass a sub/amp rack into the side of your trunk, you do this so that it sits flush into the corner against the contours of the trunk. How do people bring out the power and RACA wires from the amp? I haven't posted pictures of my enclosure online yet, but found this one that is a similar, but smaller version...
[url]https://i102.photobucket.com/albums/m103/rmlyn/2007%20Altima/Fiberglass%20Enclosure/Picture021.jpg[/url]
THe bottom and back are flush against the inside of the car, so not sure how the box will still sit flush. Also, how do you route the wires from the opening in the box to the amp when everything is enclosed?
Some simple questions, but ones that I want to make sure I understand so I don't F'up the box. :)
Replies:
Posted By: hayabusa02
Date Posted: June 15, 2010 at 6:34 AM
|
