3 12" re se sub enclosure?
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125320
Printed Date: April 25, 2024 at 7:59 PM
Topic: 3 12" re se sub enclosure?
Posted By: diygti
Subject: 3 12" re se sub enclosure?
Date Posted: December 29, 2010 at 11:04 AM
ok so i wanna run 3 12 re se subs dont have a lot of room to work with (trunk of an audi a4) now i would really just like to do wood and the problem is re really recommends a ported enclosure so i would like to build it to spec so my question is should i build a box with a slot vent or should i basically build a sealed box with a round port and if so where should i put the round port??? re recommends 2 ft tunned at 33hz
Replies:
Posted By: diygti
Date Posted: December 29, 2010 at 1:39 PM
really just looking for specs on a 3 12' ported box
Posted By: audiopros
Date Posted: December 29, 2010 at 7:29 PM
Really that subwoofer is made to be in a pretty good size ported box. Optimum you'll need 2.0 cubes ported at 33hz or compact you can go with 1.5 at 35hz. I've put them in 2.5 at 30hz and they thump hard!
-------------
Audio Pros
Lewisville,TX 75067
Get it done right, take it to the pros!
|