loud regcab no cut/through single 12?
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125793
Printed Date: April 29, 2024 at 10:57 PM
Topic: loud regcab no cut/through single 12?
Posted By: jakew88
Subject: loud regcab no cut/through single 12?
Date Posted: January 22, 2011 at 3:13 AM
So i have a regular cab tacoma, ive had a few systems in it never really professionally done, or ever sounding right at all. Ive had 2 12's that hit 139 with 1000s rms in a sealed box. then i went to two tens ported that was tuned way too low and sounded horrible, anyways, long story short. i have 2000w RMS to work with now. I want to do one ten or twelve ported. maybe sealed if i cant figure out this ported box...
my question. im going to build one large box behind the seat, sub on the passenger side, how should i orient the port? round one shooting toward the drivers door? or a longer rectangle one shooting up between the back window and seat, if you follow...
sorry for the long post.
im thinking DD, Memphis, IMage Dynamics, MMats, or RE Audio.
Tips and advice will be greatly appreciated im only working with like 2cuft MAX, so if this is just too small to go ported let me know also.
i want the doodie to lovein pound.
another note is 6.5 mounting depth max also. maybe 7.
thanks in advance.
-------------
Got Slap?
Replies:
Posted By: jakew88
Date Posted: January 22, 2011 at 3:15 AM
1996 Toyota Tacoma / Reg Cab / Bench Seat
-------------
Got Slap?
|