l port and plexiglass

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127637
Printed Date: May 02, 2024 at 8:33 AM

Topic: l port and plexiglass

Posted By: slab4ever
Subject: l port and plexiglass
Date Posted: June 15, 2011 at 3:17 PM

i need a port length of 20 inches i was wondering if this is the right way to do it? the back port piece is 3 1/4. Next question i want to put like maybe a 14x14 plexiglass section not the whole top piece just a cut out. would 3/4 work or would i need to go 1 inch i dont want it to flex!
posted_image

Replies:

Posted By: xchrisx
Date Posted: January 12, 2012 at 3:10 PM

the port is correct and you can do the plexi but you would need to rabbit the mdf so the plexi mounts on the box and doesnt look bad but id use 1" plexi.

-------------
BP

Posted By: z03mz03m
Date Posted: October 26, 2012 at 10:51 AM

I wouldnt use plexiglass. Use Polycarbonate. It machines much better without the risk of cracking like plexi especially when drilling holes.

-------------
Dodge Magnum in progress:
Pioneer DEH-80PRS - PPI Amps - Dayton Subwoofer(s) - Exodus Anarchy's - Vifa Tweeters - Kinetik Battery

Print Page | Close Window