Print Page | Close Window

body kit molding

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29692
Printed Date: June 06, 2024 at 5:42 PM


Topic: body kit molding

Posted By: wht94stang
Subject: body kit molding
Date Posted: April 04, 2004 at 10:27 PM

Ok so has anyone molded on a body kit and i'm going to say using fiberglass considering it's outside and will crack easier with bondo, let me know if so and how to or where to get instructions on how to, i just finished putting on my body kit and need to mold especially the side skirts.

Thanks

-Rich




Replies:

Posted By: devilsquid
Date Posted: April 05, 2004 at 12:52 AM

I am doing a similar process in that i am making a rollpan out of fiberglass...check out the pics...https://www.heagarty.com/Justin/vanny.htm



-------------



Posted By: defective
Date Posted: April 05, 2004 at 11:04 AM

Justin,

          What the HELL are you doing to that poor Caravan?..... : )



-------------



Posted By: devilsquid
Date Posted: April 05, 2004 at 1:45 PM
I dont know if that is a good statement or not....neways...im bored, and its paid for!

-------------


Print Page | Close Window