enclosure suggestions?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37091
Printed Date: May 17, 2024 at 10:59 AM

Topic: enclosure suggestions?

Posted By: donnie5336
Subject: enclosure suggestions?
Date Posted: August 09, 2004 at 11:06 PM

What would be the best sounding box to build for a 1996 s-10 blazer. I am going to glass a custom box to fit the back but I dont know if I shoud do sealed, ported, bandpass, etc. Any suggestions? What will sound the best since the box will be in the car with me, not in a trunk?

-------------
Donnie

Replies:

Posted By: dangerranger96
Date Posted: August 09, 2004 at 11:55 PM

sealed especially if you are going to put big subs in the box, otherwise it will be puking subs left and right if it isnt set perfectly

Posted By: CarAudioHelp
Date Posted: August 10, 2004 at 11:16 AM

Sealed is the easiest because they are the most tolerant of incorrect volumes. Ported can be done but are kind of a pain because you have to measure the volume of the enclosure and then 'glass in a port.

I don't recall ever seeing a bandpass box in fiberglass. Anyone else ever seen that attempted?

-------------

Posted By: donnie5336
Date Posted: August 10, 2004 at 12:04 PM

if i do bandpass i'm gonna build it with wood and plexi but i'm gonna FG the edges tomake it custom fit

-------------
Donnie

Print Page | Close Window