Finally finished part one.

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52084
Printed Date: May 18, 2024 at 6:12 PM

Topic: Finally finished part one.

Posted By: ophidia31
Subject: Finally finished part one.
Date Posted: March 17, 2005 at 10:45 PM

Well, I finally finished part one of my project in this new vehicle. it was for the fiberglass cover for the sub behind the rear seat. next i have to start working on the trunk but i need to get my 0 gauge ran through first. let me know what yas think. i know it looks like ripples in the one picture, but that is from the paint and the flash from the camera hitting off of it. heres the link to the rest of it if you want to look at it: https://www.cardomain.com/id/ophidia31

posted_image

-------------

Replies:

Posted By: oonikfraleyoo
Date Posted: March 17, 2005 at 11:22 PM

Very nice. Clean and simple. Very professional. Keep it up and keep the pics coming.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Posted By: realitycheck
Date Posted: March 18, 2005 at 7:25 AM

Thats cool man, looks really nice. Is that one layer of mat enough to keep that box from coming apart?????

-------------
Learning the trade one fiberglass creation at a time!

Posted By: SoundExplosion
Date Posted: March 18, 2005 at 8:38 AM

Looks great, nice job send ,more pics.

SoundExplosion

-------------
"You are only as good as your last install"
" T-taps should never be used"

Posted By: oonikfraleyoo
Date Posted: March 18, 2005 at 9:01 AM

Wait, did you really only put on one layer of mat?

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Posted By: ophidia31
Date Posted: March 18, 2005 at 10:28 AM

its not an enclosure. the enclosure is attached to it from behind and the subwoofer just shows through the opening. so if i wanted to i can just swap enclosure sizes at will.

-------------

Posted By: slociv
Date Posted: March 18, 2005 at 11:41 AM

Nice clean install. I like how it tricks your eyes as how deep it is. Looks very professional and nice touch with making it more universal so if you change your subs you can still use it.

-------------
-SloCiv

Posted By: realitycheck
Date Posted: March 18, 2005 at 12:20 PM

Cool I see what youre saying now, awesome idea man. I like it good job on the paint too.

-------------
Learning the trade one fiberglass creation at a time!

Posted By: ophidia31
Date Posted: March 18, 2005 at 2:09 PM

thanks for the compliments guys. yeah, i didnt even realize it had a weird depth thing going on. you can tell a little more when actually looking at it in person, but the pictures make it look screwy so i guess the one angled shot helps that out. lol i evened the front carpeted board out since the pictures were taken. i noticed it was a little lower on one side than the other. i have no idea what im doing with the trunk yet though. if you look at the car and then look at the trunk right now itd look like a novice did the install. lol amps on a piece of wood with bracing to keep it from moving and somewhat organized wires ran all over. its very cosmetic posted_image

-------------

Posted By: slociv
Date Posted: March 18, 2005 at 2:35 PM

It all takes time... not everyone has time to do it all at once. Keep up the good work though!

-------------
-SloCiv