trying to make an illuminated switchpanel

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52107
Printed Date: May 15, 2024 at 2:37 PM

Topic: trying to make an illuminated switchpanel

Posted By: crudeau
Subject: trying to make an illuminated switchpanel
Date Posted: March 18, 2005 at 11:37 AM

I found some blue rocker switches from Painless that I want to get. I am going to be making a switch panel for my 05 F150 that will fit in one of the Din slot's with my head unit. Not that I found the switches, I am trying to figure out how to label the panel with what switch is what. I would like for these labels to be illuminated. Anyone have any clue as to where to even start to figure this out?

Replies:

Posted By: crudeau
Date Posted: March 18, 2005 at 12:19 PM

found my own answer. sweet

https://www.melrose-nl.com/overlay.html

Print Page | Close Window