body filler on vinyl
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70885
Printed Date: June 11, 2024 at 11:50 AM
Topic: body filler on vinyl
Posted By: ajm859830
Subject: body filler on vinyl
Date Posted: January 15, 2006 at 10:55 PM
I was curious as to how well bodyfiller/bondo will stick to the vinyl on my door panel. I plan to be attaching the fiberglass speaker pods here within the next few days and to blend the pod into the door I was going to run some bondo along the seam where they meet and sand but im not sure how well itll stick to the vinyl.
Replies:
Posted By: auex
Date Posted: January 16, 2006 at 9:04 AM
It wouldn't work well at all. If it managed to stick in the first place, over time the movement of the vinyl would cause the bondo to chip and break off.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: ajm859830
Date Posted: January 16, 2006 at 3:57 PM
I went to autozone and didnt find anything that will adhere to the vinyl that is sandable. Would spot putty maybe work?
|