How do i fit neons in the boot?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71324
Printed Date: May 21, 2024 at 4:44 AM

Topic: How do i fit neons in the boot?

Posted By: andr3w
Subject: How do i fit neons in the boot?
Date Posted: January 23, 2006 at 6:28 AM

How do i fit neons in the boot of my ford mondeo MK2? BUT not drilling into the side of the car?, i've tryed double sidded stikkie tape but it gets hot and dont stick,

just give me random idears and ill try it out,

Andrew,

Replies:

Posted By: jlord16
Date Posted: January 23, 2006 at 8:35 PM

Industrial strength Velcro would be worth a try, but it may have the same results as double sided tape due to the heat

-------------
Clarion DB36MP
Infinity Kappa Perfect 10"
Respone 800w Mono
ALPINE MRP-F250
*Custom fabrications*

Posted By: auex
Date Posted: January 23, 2006 at 9:50 PM

Well not exactly knowing the vehicle, if your vehicle has a rear deck I would mount them with screws or zipties to the rear deck. If it is a hatch then you can cut two 1/4" slits into the liner/carpet and hang them with zipties or use screws and speed clips.

A picture of the trunk/hatch would give a better idea of what you are dealing with.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: rangeroveruk
Date Posted: January 23, 2006 at 11:41 PM

Where is the Heat comming from ?

where are you trying to mount the Neons

i've got a mondeo and find it hard to beleive your having that much trouble

Posted By: juniorxs
Date Posted: January 24, 2006 at 4:58 AM

silicone sealent will do it, tape the neon in place while it dries though

Posted By: andr3w
Date Posted: January 30, 2006 at 6:31 AM

auex, i cant take pictures of the car.. i aint got a pc camera,

rangeroveruk, the heat is comming from the corner of the neon where the wire is attached,

juniorxs, i've done it and its wicked, thanks,

all i've gotta do is add speekers to the roof... Any idears?