Print Page | Close Window

dying custom door panels

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80087
Printed Date: May 17, 2024 at 8:46 PM


Topic: dying custom door panels

Posted By: Jasonb61
Subject: dying custom door panels
Date Posted: July 09, 2006 at 1:50 AM

I am about to start doing some custom work to my door panels and other various interior pieces of my 92 Dakota. Anyways, my current interior is faded/worn-out redish burgandy and I'd like to go ahead and convert to a black interior so is there a way I can dye interior pieces or is painting my only option? I really want the one that will hold up the best... And when doing fiberglass, do I need to mix dye into the resin mix or wait until the project is complete?

Thanks,
-Jason



Replies:

Posted By: josh1979
Date Posted: July 09, 2006 at 9:09 AM
different meterals require defferent  procedures to change the color vinel and cloth can be dyed where plastic can be painted try SEM thay make good products in areosols and for spray guns https://www.sem.ws/index.php and can bought any where on the net.

-------------
bring back the rotary phone so i dont have to press 1 to proceed in english



Posted By: Velocity Motors
Date Posted: July 09, 2006 at 10:27 AM

Jasonb61 wrote:
... And when doing fiberglass, do I need to mix dye into the resin mix or wait until the project is complete?

You have to wait until the end of the sanding process and then you can prime and use the SEM products to match your finish on the doors.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window