Im going to attempt my first build on my 2007 chevy crew cab.
id like to put 2 10s or 12s in the console.
have 2 cup holders
have an arm rest.
anyone have pictures of anything to kinda help me get going?
i originally thought of having a sub facing back seat then have a flat top to rest my arm on then a sub facing forward magnet facing out. and then 2 cup holders but then when i run the console up to my dash to kidna flush it out its gna look plain and i really dont need a screen. so what could go there?
and lastly where can i buy something that will work as a cup holder? any car come with a removable cup holder thing i could build in?
Thanks in advance!
Ryan
Is this your first Glassing/Interior job? If so, go to this thread and give it a try before trying a project such as this.
https://www.the12volt.com/installbay/forum_posts.asp?tid=82564&PN=1
As for how to get started, the first thing is all the planning. Make sure you know what your steps are from beginning to end. Consider where the placement of each element is, the size of the boxes, and how they are intertwined and interconnected within the console. Your planning and framing will determine your final result of the project. Stretching the fabric and laying the resin is the easy part. The framing and sanding will be the primary determining factor.
-------------
Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.
Theres some pics of a concole I did in an F150 in this thread:
the12volt.com/installbay/forum_posts.asp?tid=82636&PN=1&tpn=1
As for your cup holders, try looking at PVC pipe from home dpeot..
https://www.v-sales.com/cup_holders.htm
They have a variety of drop in cup holders
