Print Page | Close Window

parrot mki9200 in 2006 chrysler 300

Printed From: the12volt.com
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120127
Printed Date: May 11, 2024 at 3:24 AM


Topic: parrot mki9200 in 2006 chrysler 300

Posted By: jsaw
Subject: parrot mki9200 in 2006 chrysler 300
Date Posted: February 14, 2010 at 6:37 PM

I've started installing the Parrot MKI9200 in my Chrysler 300 with the Metra bluetooth harness. I got everything to hook up and the radio still plays, but I'm getting no power from the Parrot to the remote screen.

I know the 300 has the CAN-BUS system and needs needs another adapter to put in an after market radio, but does it prevent the Parrot system from getting 12 volt ignition too?

Anyone installed a Parrot in a 300 and know a step I'm missing?

Thanks



Replies:

Posted By: Ween
Date Posted: February 14, 2010 at 7:43 PM

hi,

check to see if the adapter harness provides an accessory power output.  trace the accessory lead from the parrot kit back to the harness.  if it doesn't, you can connect to the lighter socket, it is switched accessory power.

m




Posted By: jsaw
Date Posted: February 15, 2010 at 3:55 PM
I couldn't get it to power on even from the lighter.

I had a wire harness for installing an aftermarket radio and cut the converter box off it and hard wired it in the metra bluetooth harness and got it to power up.

That extra box made it harder to fit in the dash and get the radio back in, but was able to squeeze it in there.


Print Page | Close Window