Parrot CK3000 in a 02 Monte Carlo SS
Printed From: the12volt.com
Forum Name: Cellular and Communications
Forum Discription: Cell Phones, Hands Free Kits, Bluetooth, Two Way Radios, CBs, Pagers, Wireless Internet, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74220
Printed Date: June 11, 2024 at 8:27 AM
Topic: Parrot CK3000 in a 02 Monte Carlo SS
Posted By: iacdistr
Subject: Parrot CK3000 in a 02 Monte Carlo SS
Date Posted: March 09, 2006 at 10:29 PM
I attempted to install a CK3000 (not evolution) in my 2002 Monte Carlo SS in the last day or so. I purchased the "peripheral" piece part number PXGM24HF for the RDS radio with amplifier installation requirements. After installing the CK3000 everything is fine except for the output to the speakers. There is an ANNOYING pop from the speakers as they make the switch to "phone" on the radio and then audio returns to normal... until a call is coming in... then the pop is heard again. I know for a fact that this is due to the stock amplifier in the rear deck. Parrot tech guys have told me the pop is due to the power going through the speaker switcher, and to use an external speaker. Is there a way to bypass the amplifier besides running Parrots' wires to the output side of the amplifier.
Replies:
Posted By: audiophd
Date Posted: March 10, 2006 at 11:39 AM
run peripherals SPK speaker switcher on the outputs of the amp. works great trust me. i have one in my RSX
Posted By: Customautomotiv
Date Posted: March 22, 2006 at 12:01 AM
Use an ajustable line output converter.
|