wiring leds

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114397
Printed Date: May 17, 2024 at 10:50 PM

Topic: wiring leds

Posted By: desitdt
Subject: wiring leds
Date Posted: June 11, 2009 at 5:06 PM

what is the best way the wire 7 led's for underdash lighting? i have plenty of resistors but the leads on the leds dont reach very far.

Replies:

Posted By: bigjohnny
Date Posted: June 12, 2009 at 8:53 PM

I usually cut the positive lead on the led really short, and one leads of the resistor really short, and solder it right to the bulb then seal it up with some heatshrink. you will still be left with lots of lead, I just like having the resistor as close to the bulb as possible, when possible.

otherwise you can search for LED wiring calculator, there are tons out there, they will show you various ways to wire LEDs and what resistors to use for a certain voltage.

Print Page | Close Window