Print Page | Close Window

spdt switches and 3 separate circuits?

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120938
Printed Date: June 11, 2024 at 9:47 PM


Topic: spdt switches and 3 separate circuits?

Posted By: jscherf92
Subject: spdt switches and 3 separate circuits?
Date Posted: March 24, 2010 at 8:14 PM

So essentially what i want to do is have a single sound controller, and three separate LED light circuits that could be put on music flash or constant on INDEPENDENTLY. as in some lights would stay on while another set would flash to music.

If i were to use an on-off-on switch and wire the music interface to one of the on's for all three switches, and a 12v constant to the other side of the switches, would this achieve my goal?

Circuits:
  • LEDGLOW 15" Interior Light Kit

  • 20 red 5mm LEDS in speakers and on amp rack

  • 30 red 5mm LEDS in a/c vents and cupholders, etc.



Replies:

Posted By: jscherf92
Date Posted: March 24, 2010 at 8:15 PM
Not really relevant but its a 2005 Pontiac Vibe Base model.


Print Page | Close Window