led relay headlight blinkers

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136987
Printed Date: April 27, 2024 at 6:15 AM

Topic: led relay headlight blinkers

Posted By: txt4nk
Subject: led relay headlight blinkers
Date Posted: July 23, 2014 at 8:24 PM

Hello all, I've done a custom headlight build on my 2011 ram 2500. I will post pictures and details about the whole build when I'm on my computer (using my phone currently). I have an led strip installed and currently have it wired to my constant 12v from the parking lights. I would like to add a relay to also turn it in to a blinker.. I'm not quite sure how to make that work.. I know that I would have to use the relay to interrupt the constant circuit using the blinker circuit as the source of interruption signal but I'm stumped as to how to wire that up. Any help would be greatly appreciated!

Replies:

Posted By: txt4nk
Date Posted: July 23, 2014 at 8:46 PM

Morimoto H1 Mini bi-xenon projector
Morimoto amber halo reverse firing in to the housing for an amber glow
Morimoto XB plasma amber LED strips (the lights in question)
Rigid D2 led pods for high beams
Morimoto XB plasma amber led strips inside of the rigid D2's to make them glow when not using as highbeams.

posted_image

Posted By: oldspark
Date Posted: July 24, 2014 at 5:58 AM

Have a look at exLED TPC Module Ver.1 or their Ver.1-B for higher currents (up to 3A).

Posted By: txt4nk
Date Posted: July 24, 2014 at 9:03 AM

Thanks!