Led light bar wiring
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139820
Printed Date: May 02, 2024 at 3:50 AM
Topic: Led light bar wiring
Posted By: straightshot7
Subject: Led light bar wiring
Date Posted: December 01, 2015 at 1:43 PM
Need some advice on how I can wire up 2 20 inch led light bars I'll be purchasing for my 2014 Honda Civic si sedan. I'll be running 1 up front and 1 under car in rear for extra reverse light. I want to run 2 3 way rocker switches for both, on/off/on, for front bar I want to be able to come on with high beams on one switch position, then have off completely in middle switch so it won't come on at all, then have in other position independent on whenever I select it? Then reverse light will be same concept, except one position to come on with reverse lights, then off, then independent on.
What's the best way to do this, the harnesses come with relays but not sure if I would need 1 or 2 per bar.
Replies:
Posted By: installs plus
Date Posted: December 22, 2015 at 2:21 AM
i know my post is kinda late if this is not done call me i can walk you through this or any other install. Im MECP through NC and can help you with any install question... Names ricky btw over 17 years exp
|