LED Bulbs Strobing Setup
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141249
Printed Date: May 04, 2024 at 6:02 PM
Topic: LED Bulbs Strobing Setup
Posted By: ekillingbeck
Subject: LED Bulbs Strobing Setup
Date Posted: May 05, 2016 at 4:37 AM
Hi All,
I'm looking to incorporate my LED bulbs into a strobing setup (warning lights)...
I'd be using the indicators, DRLs and Reverse lights, and wiring them into my strobe controller circuit.
My question is:
If I were to do this, would I need a couple of diodes in there? One on the existing line going to the bulb, and one on my new strobe line going to the bulb?
I just don't want any current trickling back up to the standard electronics and possibly frying something in the dash etc.
Any help would be appreciated.
FYI, the car in question is a Vauxhall Mokka (Buick Encore), and I've fitted it with aftermarket LED bulbs in all the mentioned places.
|