99 tacoma led light bar
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143365
Printed Date: April 28, 2024 at 9:31 PM
Topic: 99 tacoma led light bar
Posted By: blazerjohn
Subject: 99 tacoma led light bar
Date Posted: July 14, 2017 at 7:05 PM
Needing help wiring a LED light bar to my high beam headlights. It is a negative feed to the high beam. I've wired the relay as described for using a negative switched trigger. The light bar works perfectly with the negative high beam trigger as long as the low beams are on. If I flash the high beams without the headlights on, the high beams flash on with the light bar witch is correct but the light bar stays on and the high beams go off like they are supposed to. Somehow the light bar is staying energized with the flash function. I have to turn the headlight on and make sure the high beam is off in order for the light bar to go off. The light bar will stay on even If in high beam mode when the lights are turned off. My headlights are LED lights also. I know its a simple fix but cannot figure it out.
|